I’ve loved movies since I was a kid and have been interested in home theater for more than 20 years now. There are many reasons I prefer watching movies at home versus the local cinema: There’s no texting or talking, for example, and I can pause the movie if I need a potty break. But the biggest reason I love watching at home is the sound. Don’t get me wrong. It’s not that the local theater sounds bad; it’s just that my home theater sounds better overall, especially when it comes to bass.

Can i hook up 1 sub to a 4 channel amp?

My favorite sports bar just re-did their sound system, and I notice that they went with QSC K series loudspeakers. I am a fan of these self-powered units, and currently am using two KSubs, two K10s and two K12s. We are going to look at my K10 speakers today, and they are the best-performing speakers in their price range. QSC K10 speakers a miracle of modern engineering and technology, combining the speaker and amplifier into a tidy and lightweight package.

The come in at an amazing 32 pounds each, including an integrated watt watt peak power amp and an on-board variable-speed cooling fan that keeps the temperatures under control. It has a variable power supply from to volts, and both US and Euro spec connectors are included there is an IEC spec socket on the back.

Compact yet Powerful Active Subwoofer from QSC. The KSub — a member of QSC’s K Series — offers impressive sound quality, high wattage, and relatively light weight in an easy to transport package/5(27).

Seller assumes all responsibility for this listing. Postage and handling The seller has not specified a postage method to Russian Federation. Contact the seller- opens in a new window or tab and request postage to your location. Postage cost can’t be calculated. Please enter a valid postcode. Mesa, Arizona, United States Posting to: There are 69 items available. Please enter a number less than or equal to Select a valid country.

Please enter five or nine numbers for the postcode.

The Difference Between Subwoofers & Speakers

The band consisted of lead guitar, bass, drums and a lead vocalist who also played harmonica. The song list was entirely blues and we worked up to a very enthusiastic performance volume. Despite the small size of the speakers I never came close to running out of gas even when I laid in to the organ with the pedal to the floor.

I was able to keep up with the rest of the instruments without making the K8s break a sweat. After the last song, I put my hand on the power module and it was just a little warmer than room temperature. I had the speakers positioned just slightly behind me and on either side.

Feb 16,  · best way to hook up k series speakers and k sub. Forum. DJing Discussion. I have a k sub and to qsc k12s. my question is best way to hook them up. i will be coming out of my ttm Im assuming a into a on sub b into b on sub them to the highs, yes? But I can see how the K series can hook up that way though. J2t AM – 16 February.

At this point, buying preamps and discrete seperate audio components may well be getting you in too deep. There’s a lot of knowledge you need to have before you try to do anything in that route. Especially since you’re talking about 4-ohm speakers. Almost all consumer-level equipment is 8-ohm If you use different impedance equipment say 4ohm speakers with a receiver rated for 8ohms without taking into consideration all the factors, you can easily damage or destroy your speakers and the amplifier section of your receiver or discrete amplifier, etc etc It is possible to run mismatched equipment but speakers have to be hooked up in groups bye bye 5.

There is such a thing as a bridgeable amplifier, but no, you can’t hook two high-ohm receivers together to run a low-ohm speaker. As for how much power you need, watts per channel is more than enough for most people’s home theatre. Go much above that and you’ll be getting the cops called on you for noise complaints. You were asking me about running this system for listening to mp3s and downloaded movies off your computer.

To be brutally honest, you’re going way overkill. The Yamaha RX series receivers you were looking at were perfect for what you’re wanting to do. Even they might be a bit overkill. Let me tell you a secret:

Autonomous System (AS) Numbers

Saturday, 26 November How to hook up a vehicle subwoofer to a household setup. We all love bass. We also know that vehicle sub woofers tend to put out more power than household. Today’s project is a setup I’ve done already, but figured that some enthusiasts out there would love to find some info on this. This here is my beautiful 10″ W Hertz sub.

The KSub by QSC, sets a new standard for lightweight active subwoofers for the K Series loudspeaker systems.

But what the manufacturer is not showing you is the bandwidth vs. Quality of bass and how well it integrates into a system is paramount. If I have to sacrifice a bit of extension and SPL to achieve this, so be it. The Set-Up I left my EP towards the left front corner behind my couch as it has been for the past 3 years. I placed one EP on top of it and the other EP diagonally located towards the back right of the room.

Luckily the distance between both EP s was relatively equal to the primary listening area making it much easier to integrate them and not have to worry about bass cancellations due to mismanaged time alignment between the two subs. I checked the phase and found they integrated best with both subs set to 0 degrees default.

QSC K Series Speakers Overview & Setup Tutorial

For these reasons, subwoofers are typically very inefficient at converting electrical energy into sound energy. This combination of factors accounts for the higher amplifier power required to drive subwoofers, and the requirement for greater power handling for subwoofer drivers. Bass reflex enclosure schematic cross-section Heavily braced and built subwoofer enclosure Subwoofers have been designed using a number of enclosure approaches: Each enclosure type has advantages and disadvantages in efficiency increase, bass extension, cabinet size, distortion, and cost.

Jul 26,  · The QSC manual for the K series speakers recommends hooking up the K12 (or K8, K10) 1st from the mixer. Then run XLR cabling to the sub(s). Both K12’s should be set to “EXT SUB”.

Subwoofer Setup Part I: Placement and positioning While a subwoofer’s deep bass is nondirectional, it would be unwise to just stick the sub anywhere that’s convenient in your room. Corner placement is the de facto strategy for most people, possibly because the sub will then be out of the way and almost always produces the most bass, but corner placement may not yield the most accurate bass, or smoothest transition to the speakers.

The sub and speakers have to work together as a team, and ideally you should never hear the sub as a separate sound source. All of the bass should appear to come from the speakers. With small speakers, it’s best to keep the sub within 3 or 4 feet of the front left or right speakers. Once the sub is a lot farther away, it will be harder to maintain the illusion the bass is coming from the speakers. For really small speakers or skinny sound bars, keep the sub as close as possible to the speaker s.

If you have larger speakers with 4-inch or larger woofers , some placement experimentation may be useful; play a CD with lots of deep bass and keep repeating the track as you move the sub to all of the visually acceptable locations in your listening room. You’ll be amazed just how different the bass sounds in different locations — some will be muddy, some will sound louder, and some will reduce the bass volume.

The goal is to get the best balance of deep bass from the sub and still have the mid and upper bass from the speakers in equal proportions adjust the subwoofer volume control in each new position. In some rooms, smooth bass response won’t be all that hard to achieve, but I’ve heard my share of “problem” rooms where the bass always sounds boomy or muddy.

If you’re having problems finding the perfect spot, try this method:

320W 2.1ch Sound Bar with Wireless Subwoofer and Bluetooth® Connectivity

New built-in resonant filter on each decks Database Management: CUE can automatically sync tracks together for effortless song transitions. So we made search powerful, fast, and flexible.

The KSC subwoofer represents the world’s first-in-class single-box powered cardioid subwoofer solution for highly portable entertainment and installation applications.

Settings Library – Along with a useful library of EQ and Dynamics settings, operators can store their own settings in the console or to a USB memory stick, making initial set up and transition between shows even easier. Sophisticated Cue List Management – Allows changes to be applied to multiple cues and recall scope to be set per snapshot.

Automated microphone mixing – STUDER vMIX processing is built-in, with ability to seamlessly process up to two separate groups of 16 inputs, with clear and intuitive metering showing gain reduction. Snapshot crossfades – Snapshot recalls can use crossfades to transition smoothly from one setting to the next. Adjust monitor levels from the stage. Includes control of EQ Dynamics and metering overview. All busses to stereo – All busses can be turned to stereo without tying up two busses, providing a massive 24 stereo mix capability — perfect for mixing large monitor applications.

Monitor engineers can retain control of important global elements such as ambient mics while also having a monitor mix selected and adjusting groups of sources within the current mix using the Aux-VCAs. Blue illumination of FaderGlow indicates that the VCA is controlling the global channel level to all mixes.

Auto-increase of ambient mic levels in monitor mixes between songs – Performers using in-ear monitors want to hear the audience between songs. Vi has the facility to externally control the Gate or Ducking processing from a bus in the console, so all you have to do is insert a ducker on an ambient mic with an external source of the LR bus or a spare bus, and the audience level increases automatically when the performers stop playing.

QSC K10 Laptop Karaoke DJ System PC Karaoke Software

It consists of 5 speakers, a subwoofer, and some kind of surround sound receiver. The basic idea is that you connect your five speakers and subwoofer to the receiver to enjoy 5. This article will give you some clear instructions on how to hook up a 5. If you need something more advanced, check out How to hook up a receiver. Identifying Components of a 5. By “system”, I mean your surround sound receiver, your speakers five speakers and a subwoofer , your TV, and any other components like a DVD player.

Designed, kw series speakers is a 35 mm pole 1 k sub to hook up. October qsc international distributor qsc k series tops have a full copy of products offer using various aspects of dbx xs. The out preform my amps match both blue in color so – english hookup drawings for.

There are settings on your surround receiver and there are settings on your sub. Getting the correct subwoofer settings for home theater means correctly configuring and understanding both. This guide will take you step by step in doing just that. Setting up your subwoofer properly will almost always affect your entire system and is well worth it for those looking to achieve the best possible movie-watching or music-listening experience.

The frequency below which your subwoofer will be working and the frequency above which your main speakers will be reproducing frequencies for anything sent to the LFE or sub channel. The low-pass crossover is typically variable from 40Hz to somewhere around Hz. The frequency above which your speakers will take over. This is a setting most commonly associated with a subwoofer that has speaker level outputs for connecting satellite speakers.

The high-pass crossover is typically fixed on subwoofers that have this feature.

QSC KSub vs KW181